Don’t gamble with bike tyre safety

bike_safetyApril is bike tyre safety month and TyreSafe the UK’s leading tyre safety organisation is highlighting the high price that motorcyclists pay for not looking after their tyres properly.

The latest Department for Transport road casualty figures show there were 82 motorcycle accidents in 2009 where illegal, defective or underinflated tyres were a contributory factor.

Stuart Jackson TyreSafe Chairman warns motorcyclists not to be complacent about their tyres and says: “While we welcome the news that there are fewer tyre related motorbike accidents, the number is still far too high. Tyres play a crucial part when it comes to motorbike safety as they are the only point of contact that the bike has with the road surface.”

Statistics from VOSA’s MOT data reveal that the level of tyre neglect still needs to be addressed. The percentage of motorbikes failing their MOT first time because of defective tyres and wheels in 2009/10 remained at just under 4 percent – similar to the previous year.

To help motorcyclists ensure their tyres are in a safe and roadworthy condition, TyreSafe has teamed up with tyre and motorcycle dealers across the UK to offer a free tyre safety check throughout April’s bike tyre safety month.

The checks will include a visual inspection, looking in particular for any cuts, bulges or cracks in the tyre, plus any any irregular wear patterns which can be a sign of problems with other components, set-up or riding style.

Pressures and tread depth will be checked against the recommended levels with any necessary adjustments made for any pillion or pannier loads.

Tyresafe recommend that Riders check their tyres at least once a week. Particular attention should be paid before the first ride of the season especially if the motorbike has been stored in the garage over the winter months.
TyreSafe top tips for motorcycle tyre safety:

1. Check your tyre pressures from cold at least once a week using an accurate gauge
2. Inflate tyres to the level recommended in the manufacturer’s handbook
3. Inspect tyres for cuts, bulges, uneven wear or objects embedded into the tread pattern and replace if necessary
4. Use dust caps to keep dirt away from the valve core and to act as a secondary air seal
5. If your rims are cracked or bent they should be replaced immediately
6. Check that your tread depth is not below the legal minimum of 1mm (for bikes over 50cc)
7. Replace old or damaged valve stems
8. Select the correct type of tyre for your machine and riding style
9. Check that both tyres fitted to the bike are made by the same manufacturer and have the same tread pattern
10. Make sure that your tyre has been fitted the right way round by checking the directional arrows on the sidewall
11. When replacing tube type tyres always use a new inner tube
12. Make sure your tyre/wheel assembly is balanced correctly
13. Keep oil and grease off your tyres using detergent if necessary
14. If you are unsure on any aspect of tyre pressure or tyre condition take your bike to an approved fitting centre and speak to the experts

For more information about motorcycle tyre safety or bike tyre safety month visit

This entry was posted in Motoring News. Bookmark the permalink.

Leave a Reply